Highlighted
100x
2 Iron

That port 8042 is currently in use, please select again

Jump to solution

hi,all:

redhat 5.2

autostart 5.3sp3~

when i install and setup  the second node ,it prometed "That port 8042 is currently in use, please select again'

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
wangyd
2 Iron

Re: That port 8042 is currently in use, please select again

Jump to solution

Thanks.

We resolve this question,it is the hosts's  problem.

0 Kudos
4 Replies
tribicic
3 Argentium

Re: That port 8042 is currently in use, please select again

Jump to solution
Hello - as the message suggests, there is a service that is already using this port. You can run rpcinfo -p [hostname] for the server you are having problems with to find out what it is. Good luck!
0 Kudos
wangyd
2 Iron

Re: That port 8042 is currently in use, please select again

Jump to solution

Hi,

And we have put into a lot of 1000-65535 ports range,but the message is the same:That portxxxxis currently in use, please select again.

As you know,in fact,the port of 8042 have no program used it.we had use netstat,lsof found the port,but no program used it.

#ls -i :8042

#netstat -anp|grep 8042

and output is nothing.

Thanks.

0 Kudos
wangyd
2 Iron

Re: That port 8042 is currently in use, please select again

Jump to solution

Thanks.

We resolve this question,it is the hosts's  problem.

0 Kudos
SKT2
4 Tellurium

Re: That port 8042 is currently in use, please select again

Jump to solution

what was that exactly.

0 Kudos