AndrewP27
2 Bronze

Timefinder VP Snap - Adding new source/target devices

Jump to solution

We have some scripts set up that perform the creation, activation and termination of some VP Snap sessions. These run at 6hr intervals and are controlled by crontab on a remote server. Once the session is active it stays active for 2 days. Then after 2 days the next scheduled job will run and it will terminate the current session and re-create a new one.

The problem i have is we have some existing device files and need to append on to it some new source/target pairs into them but if i do that the scripted termination fails and then of course the re-creation of a new session fails because the termination has not killed the old session.

So for example we currently have this device file;

[emcscr@ukbbpssspxy01 device_files]$ cat DF_BACKUP_23

#Src  Tgt

01C39 0200D

01C07 02003

01C08 02004

01C05 02005

01C06 02006

01C76 0205F

01C7E 02067

01C66 0202F

01537 02017

And you can see there is an active session running for it;

[emcscr@ukbbpssspxy01 scripts]$ symclone -sid xxxx -f /appl/emc/device_files/DF_BACKUP_23 query

Device File Name      : /appl/emc/device_files/DF_BACKUP_23

Device's Symmetrix ID : xxxxxxxxxxxxxx


        Source Device                    Target Device            State     Cpy

--------------------------------- ---------------------------- ------------ ---

         Sym   Protected Modified          Sym   Modified

Logical  Dev   Tracks    Tracks   Logical  Dev   Tracks   CGDP SRC <=> TGT  (%)

--------------------------------- ---------------------------- ------------ ---

N/A      01C39    245675        0 N/A      0200D        0 V... CopyOnWrite    0

N/A      01C07     47343        0 N/A      02003        0 V... CopyOnWrite   42

N/A      01C08     47816        0 N/A      02004        0 V... CopyOnWrite   41

N/A      01C05     47356        0 N/A      02005        0 V... CopyOnWrite   42

N/A      01C06     47828        0 N/A      02006        0 V... CopyOnWrite   41

N/A      01C76  24462184        0 N/A      0205F        0 V... CopyOnWrite    0

N/A      01C7E  24532492        0 N/A      02067        0 V... CopyOnWrite    0

N/A      01C66  16291904        0 N/A      0202F        0 V... CopyOnWrite    0

N/A      01537   8138633        0 N/A      02017        0 V... CopyOnWrite    0

Total          --------- --------                --------

  Track(s)     73861232        0                       0

  MB(s)          4616327        0                       0

And what i need to do is add a new device pair into the device file so it is included the next time this session is created. I know i can add the pair detail into the device file but the existing session will not terminate if i do that because the device file contains a pair that is not in an active session.

So does anyone have any ideas on how i can add this pair and let the scripted termination and then creation scripts still control everything? Or is it simply a case of i have to manually terminate the existing sessions, edit the device files and then manually restart the session or leave it to the scripts to start it when its next scheduled?

Any assistance, thoughts and ideas would be appreciated

0 Kudos
1 Solution

Accepted Solutions
dynamox
6 Thallium

Re: Timefinder VP Snap - Adding new source/target devices

Jump to solution

Andrew,

this temp file would only contain your new devices, not your prod devices.  Once relationship was built and in the same state as your prod devices, you would simply delete this temp file and add those devices into your production file.

0 Kudos
4 Replies
dynamox
6 Thallium

Re: Timefinder VP Snap - Adding new source/target devices

Jump to solution

Andrew,

maybe i don't clearly understand your requirement but what's stopping you from creating a temp file with new devices, create the relationship and so the state of that relationship is the same as your "prod" devices. Now simply append the new devices to your DF_BACKUP_23 file.

Highlighted
AndrewP27
2 Bronze

Re: Timefinder VP Snap - Adding new source/target devices

Jump to solution

Hi Dynamox,

I tried something similar to what you suggested but i could not figure out how we would get rid of this temporary session. If i terminated that session manually i noticed the device pairing also disappeared from the "prod" session as well and that would cause the "prod" session not to terminate when the script ran at its scheduled time because the device file contained a source/target that was not part of a clone session.

We've sorted it now anyway but introducing a quick IF statement into the scripts that controls all the creation, activation and termination of the session. It checks in a different folder for a new version of the device file and if it exists moves the original one out and replaces it. May not be the best solution but seems to work.

0 Kudos
dynamox
6 Thallium

Re: Timefinder VP Snap - Adding new source/target devices

Jump to solution

Andrew,

this temp file would only contain your new devices, not your prod devices.  Once relationship was built and in the same state as your prod devices, you would simply delete this temp file and add those devices into your production file.

0 Kudos
AndrewP27
2 Bronze

Re: Timefinder VP Snap - Adding new source/target devices

Jump to solution

Hi,

Ah i see what you mean. I was thinking that the temporary device file would have had to stay in place. I did a few tests but never thought to just delete the temporary file and leave it at that.

Oh well never mind they have written this IF statement into the scripts and seems to be working.

Thanks for the clarification anyway.

0 Kudos