SDC on ESX not registered....

Hello,

I'm currently testing ScaleIO v2.00 on my lab and I have a little problem.

I have two ESX and a Windows Server on which I've installed ScaleIO.

The SVMs are master and slave MDMs, and the Windows server is tie-breaker.

I have a management network (20.2.100.0/24) on vswitch0 and a data network (20.2.130.0/24) on vswitch2. The SVM have two network cards (one on management network, and one on data network).

On my ESX, I cannot register the SDC on the data network. But it works on management network......

I saw the thread 222580 but it didn't solve my problem.

From my ESX, I can ping my MDM on the data network (20.2.130.0/24) :

~ # esxcfg-vmknic -l

Interface  Port Group/DVPort/Opaque Network        IP Family IP Address                              Netmask         Broadcast       MAC Address       MTU     TSO MSS   Enabled Type     

vmk0       Management Network                      IPv4      20.2.100.2                              255.255.255.0   20.2.100.255    98:be:94:28:d5:9a 1500    65535     true    STATIC   

vmk1       Stockage-SDC                            IPv4      20.2.130.2                              255.255.255.0   20.2.130.255    00:50:56:66:37:6a 1500    65535     true    STATIC

~ # ping -I vmk1 20.2.130.201 (ping SVM1 on data network)

PING 20.2.130.201 (20.2.130.201): 56 data bytes

64 bytes from 20.2.130.201: icmp_seq=0 ttl=64 time=0.340 ms

~ # ping -I vmk1 20.2.130.202 (ping SVM2 on data network)

PING 20.2.130.202 (20.2.130.202): 56 data bytes

64 bytes from 20.2.130.202: icmp_seq=0 ttl=64 time=0.196 ms

The scini module is correctly set :

esxcli system module parameters set -m scini -p "IoctlMdmIPStr=20.2.130.201,20.2.130.202"

But the SDC don't register......

Thanks by advance for any idea......