Highlighted
2 Bronze

ESRS via Storage Processors

Jump to solution

Trying to figure out ESRS.  I would like to keep the configuration as simple as possible.

Initially, I was thinking "just" the ESRS gateway non-clustered.

After doing some research.  It looks as if we can configure ESRS directly within the Storage Processor.

I just finished the VNX5200 implementation and it did have the ESRS configuration link.  I was under the impression you still needed the gateway.

Can anyone confirm if this is possible?  ESRS directly via the Storage Processors.

Much appreciated,

Damian

0 Kudos
1 Solution

Accepted Solutions
Highlighted
3 Argentum

Re: ESRS via Storage Processors

Jump to solution

Hello

ESRS embedded device client on Storage Processor is supported for following OE:

5.32.000.5.215 and later

05.33.000.5.074 and later

If supported OE, you will find Manage ESRS by "Selecting your system and from the task list, under Service Tasks, select Manage ESRS."

https://support.emc.com/docu48473_EMC_Secure_Remote_Support_for_VNX.pdf?language=en_US

View solution in original post

0 Kudos
2 Replies
Highlighted
3 Argentum

Re: ESRS via Storage Processors

Jump to solution

Hello

ESRS embedded device client on Storage Processor is supported for following OE:

5.32.000.5.215 and later

05.33.000.5.074 and later

If supported OE, you will find Manage ESRS by "Selecting your system and from the task list, under Service Tasks, select Manage ESRS."

https://support.emc.com/docu48473_EMC_Secure_Remote_Support_for_VNX.pdf?language=en_US

View solution in original post

0 Kudos
Highlighted
3 Silver

Re: ESRS via Storage Processors

Jump to solution

Yes , agree with Mana.ix  ESRS embedded on the storage processor with individual connect home feature, or if you want, the ESRS IP Client Management Station (same as sp but a  standalone monitoring connect home server that has ESRS and monitoring software and add your Clariions and VNX to it for monitoring. But SP's individual is simple