DFM certification for Cisco CGR 1240 device

Hi,

We are trying to support Cisco 1240 Connected Grid Router device in LMS Fault Management application.we are using the following certification to support in DFM.

Device is having both Power Supply and Temperature Sensor components and for getting the Power Supply using CISCO-ENVMON-MIB and for Temperature sensor using CISCO-ENTITY-SENSOR-MIB.

CISCO-ENTITYFRU-CONTROL mib is returning only module status.

# Cisco 1240 Connected Grid Router

.1.3.6.1.4.1.9.1.1559 {

    TYPE = Router

    VENDOR = Cisco

    MODEL = ciscoCGR1240K9

    CERTIFICATION = CERTIFIED

    CONT = Cisco-EntityFRU

    NEIGHBOR = Cisco-Cdp

    HEALTH = Cisco-Router

INSTRUMENTATION:

    Environment                         = CiscoEnvMon:DeviceID

    CPU/Memory                          = CiscoRouter:DeviceID

    Card-Fault                          = CiscoEntityFRU:DeviceID

    Interface-Fault                     = MIB2

    Interface-Performance               = CiscoRouter

    Interface-Ethernet-Performance      = CiscoRouter_Ethernet

}

Using the above certification DFM is discovering only PowerSupply components alone but not temperature sensor.

We tried to modify the certification like below

# Cisco 1240 Connected Grid Router

.1.3.6.1.4.1.9.1.1559 {

    TYPE = Router

    VENDOR = Cisco

    MODEL = ciscoCGR1240K9

    CERTIFICATION = CERTIFIED

    CONT = Cisco-EntityFRU

    NEIGHBOR = Cisco-Cdp

    HEALTH = Cisco-Router-CRS-EntSensor

INSTRUMENTATION:

    Environment                         = CiscoEnvMon:DeviceID

    CPU/Memory                          = CiscoRouter:DeviceID

    Card-Fault                          = CiscoEntityFRU

    Interface-Fault                     = MIB2

    Interface-Performance               = CiscoRouter

    Interface-Ethernet-Performance      = CiscoRouter_Ethernet

}

For the above certification DFM is discovering only Temperature sensor components alone but not power supply.

Up to now we are trying to discover all components present in the Entity mib.

Please let us know what modification we need to do in the certification for discovering both power supply and temperature sensor components.

please help on this.

Attaching the screen shots.

1.HEALTH = Cisco-Router

CGR Certification-1.png

2.HEALTH = Cisco-Router-CRS-EntSensor

CGR Certification-2.png

Regards,

Neelima.

Labels (1)
0 Kudos
11 Replies
8 Krypton

Re: DFM certification for Cisco CGR 1240 device

Hi Neelima,

Without a snap of the device in question I cannot test the field certification.

Can you please try the following and let me know how it goes:

# Cisco 2010 Connected Grid Router

.1.3.6.1.4.1.9.1.1559 {

    TYPE = Router

    VENDOR = Cisco

    MODEL = ciscoCGR1240K9

    CERTIFICATION = TEMPLATE

    CONT = Cisco-Entity

    NEIGHBOR = Cisco-Cdp

    HEALTH = Cisco-Router

INSTRUMENTATION:

    Environment                         = CiscoEnvMon:DeviceID

    CPU/Memory                          = CiscoRouter:DeviceID

    Card-Fault                          = CiscoEntityFRU:DeviceID

    Interface-Fault                     = MIB2

    Interface-Performance               = CiscoRouter

    Interface-Ethernet-Performance      = CiscoRouter_Ethernet

}

Kind Regards,

Paul

0 Kudos

Re: DFM certification for Cisco CGR 1240 device

Hi Paul,

Thanks for your response.

I tried with the above certification with CERTIFICATION = TEMPLATE and still DFM is discovering only the Power Supply component alone.

Attaching the Detailed Device View page screen shot.

CGR Certification-3.png

Attaching the device snap shot

KL86108.png

Regards,

Neelima.

0 Kudos

Re: DFM certification for Cisco CGR 1240 device

Hi Paul,

Could you please update on this.

Thanks&Regards,

Neelima

0 Kudos
8 Krypton

Re: DFM certification for Cisco CGR 1240 device

Hi Neelima,

I made more changes to the certifcation than just the CERTIFICATION = TEMPLATE line, did you import all of it?

By SNAP I meant an SNMP walk of the device. Please see KB article below for details how how to generate the SNMPWalk files:

https://support.emc.com/kb/49676

Please upload all three files created.

Finally, as this device is not offically supported, this certification attempt is best effort only.

Thanks,

Kind Regards,

Paul O'Rourke

0 Kudos

Re: DFM certification for Cisco CGR 1240 device

Hi Paul,

Thanks for your response.

I imported all changes of your certification and still DFM is discovering only the Power Supply component alone.

Below link contains the attachments for CGR 1240 Device .walk,.mimic and .snap files.

http://wikicentral.cisco.com/display/PROJECT/CGR+1240+Device+SNMP+walk+files

Thanks&Regards,

Neelima.

0 Kudos

Re: DFM certification for Cisco CGR 1240 device

Hi Paul,

Could you please let us know what can be the estimated ETA date for this issue.Actually in our LMS project we need to provide Day-1 support for this CGR 1240 device in Fault Management application and we need to post the supported device packages in Cisco.com.

Thanks in advance.

Regards,

Neelima.

0 Kudos
8 Krypton

Re: DFM certification for Cisco CGR 1240 device

Hi Neelima,

I do not have access to the above link to download the snap, mimic and walk files.

Can you please provide them here?

Also, please note we are attempting to provide a field certification for this issue. Field certifications provide temporary relief and are best effort only.

The certification team provide official certifications.

If you wish to get an official certification, please open an SR and attach the snap, mimic and walk files for this device.

Thanks,

Kind Regards,

Paul O'Rourke

Re: DFM certification for Cisco CGR 1240 device

Hi Paul,

Thanks for your reply.

Sorry for sharing the internal thread.

Adding the links where the .walk,.mimic and .snap files of CGR 1240 device can be downloaded.

https://community.emc.com/docs/DOC-33945

https://community.emc.com/docs/DOC-33947

https://community.emc.com/docs/DOC-33948

Thanks&Regards,

Neelima.

0 Kudos
8 Krypton

Re: DFM certification for Cisco CGR 1240 device

Hi Neelima,

Sorry for the delay getting back to you regarding this post.

Can you please check the following field certification and let me know it it provides both the temperature sensor and power supply information?  I do not have your DFM version details to confirm here.

# Cisco 1240 Connected Grid Router

.1.3.6.1.4.1.9.1.1559 {

    TYPE = Router

    VENDOR = Cisco

    MODEL = ciscoCGR1240K9

    CERTIFICATION = TEMPLATE

    CONT = Cisco-EntityFRU

    NEIGHBOR = Cisco-Cdp

    HEALTH = Cisco-MDS

INSTRUMENTATION:

    Environment                         = CiscoEnvMon:DeviceID

    CPU/Memory                          = CiscoRouter:DeviceID

    Card-Fault                          = CiscoEntityFRU

    Interface-Fault                     = MIB2

    Interface-Performance               = CiscoRouter

    Interface-Ethernet-Performance      = CiscoRouter_Ethernet

}

Thanks,

Paul

0 Kudos