I have downloaded on the Dell support site (Drivers and downloads) the last Drive Firmware Package : "Unity-Drive-Firmware-V19RC-2021-11-30.tgz.bin.gpg", but the Unity300 don't accept the driver with the error message : " File uploaded is incorrect format ".
Also, the checksum are different. I think it is not the good file available on the Dell support site.
Can you ask the drivers update team to check the file please ?
Thank you in advance
please can you check this article to see if the checksum is correct?
Thank you for your help, but i have checked all this KB. Time of the array is OK, the filename is not renamed after download, but the checksum of the file is not correct.
I have seen that anther version of the driver is available V20, on the Dell Support site, but when i upload the file, i obtain the same error message.
Can you compare the checksum on your side, and contact the good Team to change this file please = UNITY-Drive-Firmware-V20-GPG-2022-06-13.tgz.bin.gpg.
Thank you in advance.
I compared the checksum on my side and it matches with the one on the website.
Can you try to download the file avoiding any download manager, or similar? Try also another browser.
I am having the same issue with Unity drive firmware v20. downloaded with 3 different browsers, attempted to update each file with 3 different browsers, same result every time. There is a problem with the file.
Same result under unisphere ver 184.108.40.206.5.007 and 220.127.116.11.5.137, tested against 3 different Unity HA deployments.
Did you verified the checksum? Because if the checksum is not valid the file you downloaded is not the same.