Highlighted
cavan11
1 Copper

Adding a 1.0TB SATA drive as a secondary drive to my IDE primary drive: Doable?

I have a Dimension 4600.  It's about 7 years old.  It has a WD800BB hard drive (80GB) as the primary.  I want to add secondary hard drive so that my programs are on the primary and all the docs, etc., are on the secondary.  (80GB is plenty for my programs!)

My system uses XP Pro (Patch 3+).  It's all up-to-date.

Dell sold me a Western Digital 1TB SATA 3Gb/s Hard Drive 64MB IntelliPower 3.5IN Caviar Green for $64.99 (as yet, unopened!) and Dell assured me (repeatedly) that it is 100% fully compatible with my system.  I've begun to have my doubts.

I've spoken with various local techies and they paint a nebulous picture.  Various sources have told me:  (1) that I might need to upgrade my BIOS to use a SATA hard drive with my PATA, i.e., IDE, hard drive; (2) that upgrading the BIOS is iffy and could smoke my motherboard, necessitating my buying a new motherboard; (3) that I will need a conversion cable to connect the SATA to the IDE (PATA) hard drive; and (4) that I'll need a controller card for the SATA drive because it's unlikely that my system will recognize anything as large as 1.0TB.

Any insightful, savvy, experienced folks want to weigh in on this heart-wrenching problem?  If so, bear in mind that I've got a chance to buy two new WD 2500 (250GB) hard drives for $90 (2 x $45).  While it's less than half the space I'd get with the SATA setup, the issues are miniscule---or so it seems.

Yes, I'm a babe in the woods, a lamb who fears he's being led to the slaughter.  Help!  Thanks.

Need more details?  Let me know and I'll provide all that I can.  Best wishes.

0 Kudos
3 Replies
bacillus
5 Osmium

Re: Adding a 1.0TB SATA drive as a secondary drive to my IDE primary drive: Doable?

I suspect that unless you buy a sata pci card to run the new hdd off of, that sata hdd will not work with your motherboard as it only appears to take PATA hdds..

0 Kudos
8 Krypton

Re: Adding a 1.0TB SATA drive as a secondary drive to my IDE primary drive: Doable?

The drive will work - but not as a secondary.  If you install a SATA drive alongside an IDE drive, the SATA drive MUST be the boot device.

0 Kudos
speedstep
6 Thallium

Re: Adding a 1.0TB SATA drive as a secondary drive to my IDE primary drive: Doable?

 

I used to have a 4600 and I know it will take SATA.  HOWEVER it will not like mixing PATA and SATA.

Easiest fix is to convert your SATA to PATA and use Master Jumper on the primary and Slave Jumper on the converted drive.

No drivers needed.

Micro Center - Kingwin SATA to IDE Bridge Board ADP-06


SATA to IDE Bridge Board
Larger image and other views
_
_
_
Our Price:
$9.99
SKU 376152
Mfr Part #: ADP-06
UPC: 812348010265
Close
SATA to IDE Bridge Board SATA to IDE Bridge Board SATA to IDE Bridge Board
 
_
_

 
SKU 376152
Mfr Part #: ADP-06
UPC: 812348010265


Report Unresolved Customer Service Issues
here

I do not work for Dell. I too am a user.

The forum is primarily user to user, with Dell employees moderating
Contact USA Technical Support






Get Support on Twitter @DellCaresPro