Unsolved
This post is more than 5 years old
7 Posts
0
10509
DataSafe / Norton Ghost 10
Is there any way to verify that I indeed have Norton Ghost on my system? I have a 410 w/ dual HD and DataSafe. I can cntl/F11 and get into PC Restore but I can not find any reference to Ghost on my box. Also, should DataSafe have created a second device (D:) on my system, as I do NOT have a second device. Would appreciate any information. Thanks.
krdomingue
181 Posts
0
September 10th, 2006 16:00
krdomingue
181 Posts
0
September 11th, 2006 01:00
DesertSkunk
5 Posts
0
September 11th, 2006 19:00
The best way would be to call Dell XPS and cite the case number I gave. They can walk you through it step by step. It is somewhat of a complicated process and if done wrong could cause you to loose the whole HDD contents. "Oh No, Mr. Bill::mansurprised:
If you feel brave, start by booting from a cold shutdown and holding the ctrl and F11 keys down. This will take you to the Dell Recovery Management sector. Then got to Delete Partition and follow the instructions. You get plenty of "do you want to do this? Do you really, really want to do this warnings.
DesertSkunk
5 Posts
0
September 13th, 2006 22:00
The way I did it on my system was to go to "Control Panel" and then the add/delete window. If Ghost is installed it should show up there. After I had repartitioned my C/D drive to C only I then deleted Ghost using the control panel add/delete function.
I would delete the D partition first or you probably will end up with an unhappy ghost! :smileysad: