Highlighted
Atmel_1
1 Copper

Iomega StoreCenter ix2-2 need recovery

Good day!

In my storage backup two disks of 2TB was in the RAID1

but once one of disks become at bad status and no rebuilding.

I uninstalled that disk and run dd if=/dev/zero of=/dev/my_bad_disk in linux.

Then I inserted that disk in his place and turn Iomega.

Iomega blinks by "Turn" led and no define in network now.

Second disk is normal and I can read it by mounting in linux.

Then I run dd if=/dev/second_normal_disk of=/dev/my_bad_disk in linux

and again inserted both disks on their places but Iomega blinks by "Turn" led and is no define in network again.

 

How i can to recover my device?

 

 

 

 

.

0 Kudos
1 Reply
Atmel_1
1 Copper

Re: Iomega StoreCenter ix2-2 need recovery

lvscan result

ACTIVE '/dev/566dcdd9_vg/lv69e5bd37' [1,80 TiB] inherit
ACTIVE '/dev/md0_vg/BFDlv' [4,00 GiB] inherit
ACTIVE '/dev/md0_vg/vol1' [16,00 GiB] inherit

0 Kudos