Unsolved
This post is more than 5 years old
3 Posts
0
130882
No Drives Detected Dell Latitude E6400
I am facing problem "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics." on my dell latitude E6400.HDD is ok.not boot from usb or cd also.
Kindly advise ASAP.
Thanks & Regards
Shiraz
DELL-Ravi Ch
7 Technologist
7 Technologist
•
7.1K Posts
0
July 15th, 2013 20:00
Hi shirazoo7,
I’d suggest that you follow the steps mentioned below and check if the system turns ON.
If the system turns on then I would suggest that you run the diagnostics on the computer by following the steps mentioned below and check if there is any issue with the hardware on your system.
shirazoo7
3 Posts
0
July 16th, 2013 21:00
Hi Dear,
I try your suggested procedure they give me Error Code 0221.Kindly advise.
Thanks & Regards
Shiraz Shamim
DELL-Ravi Ch
7 Technologist
7 Technologist
•
7.1K Posts
0
July 17th, 2013 03:00
Hi shirazoo7,
I would suggest you to remove and reseat the hard drive on the system and check.
shirazoo7
3 Posts
0
July 17th, 2013 23:00
Hi Ravi,
I completely remove & restart laptop but same error..Kindly advise ASAP
DELL-Ravi Ch
7 Technologist
7 Technologist
•
7.1K Posts
0
July 18th, 2013 03:00
Hi shirazoo7,
I see that the motherboard seems to be faulty on your system. Please click on the link below to check the warranty of the system. In case the system is under warranty, send me a private message with the system service tag to assist you further. Please click on my name and click Start Conversation to send me a private message.
http://dell.to/12Bz4Il
kadenesi
1 Message
1
October 5th, 2015 13:00
error code 0147
msg:error code 2000-0147
chammy02
1 Message
0
June 8th, 2016 16:00
The error code is 2000-0150.
Please reply to this ASAP
ejn63
1 Rookie
1 Rookie
•
87.5K Posts
0
June 9th, 2016 06:00
Unplug the system, remove the battery and hold the power button for 30 sec. Remove and reinstall the drive.
If it's then still not seen, it's toast - you'll need a new hard drive.
FrankensteinJR
1 Message
0
June 29th, 2020 10:00
I'm also having the same problem, the error code is 0411. Can you help me? Tq