This post is more than 5 years old
14 Posts
0
33332
Replace drive in RAID 6 array
Hello,
I have a PE T610 with H700 raid controller, 2 drives in RAID-1 and 6 drives in RAID-6 array. One of the drives in the RAID-6 is showing media and other errors. The drive is still online but I have issues with it and want to replace it.
Enclosure Device ID: 32
Slot Number: 4
Drive's postion: DiskGroup: 1, Span: 0, Arm: 2
Enclosure position: 0
Device Id: 4
WWN:
Sequence Number: 2
Media Error Count: 17
Other Error Count: 145
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Raw Size: 2.728 TB [0x15d50a3b0 Sectors]
Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors]
Coerced Size: 2.728 TB [0x15d400000 Sectors]
Firmware state: Online, Spun Up
Device Firmware Level: CC4B
The drives are HotSwap. My question is, can just unplug the drive and plug the new one or I need to use megacli to first set it offline like this:
megacli -PDOffline -PhysDrv [32:4] -a0
megacli -PDMarkMissing -PhysDrv [32:4] -a0
megacli -PDPrpRmv -PhysDrv [32:4] -a0
Thank you in advance for your help.
ejn63
1 Rookie
1 Rookie
•
87.5K Posts
0
December 15th, 2013 08:00
You should be able to simply replace the drive and rebuild automatically. That said, before doing anything, be sure your system is fully backed up. RAID is redundancy - NOT a substitute for having a current, functional, verified backup.
zillionnn
14 Posts
0
December 15th, 2013 09:00
I haven't said that I don't have a backup, I just want to fix this array. Thank you for your answer.