Since I am not getting any response to this issue, going to post for more visibility.
We are currently using SCCM and we have 1 client we are working with that is in need of updating the D6000 Firmware and we are attempting at this using SCCM. The problem we face is a 2 part issue. One, the D6000 update doesn't provided any documentation on how to deploy SILENTLY. Every which way to go about it, the splash screen appears and can't get around it. Using a library of known /switches and nothing works for this installer. Has anyone or a Blue post from Dell got a better solution for SCCM users and/or provide a enterprise version of this installer?
Secondly, using Application model in SCCM, detection method used to determine if the update is installed is nearly impossible. The only thing that gives me some insight is SYSTEM\CurrentControlSet\Enum\USB\VID_17E9&PID_6006 key but even then doesn't provide insight what version are we currently on. Now, I know there is a DSIAPC installer that you can collectively get using SCCM hardware inventory back from the Docking Station but of course proprietary software doesn't work on any other vendor models, HP, Lenovo, etc.
Both DELL and Microsoft have SCCM support.
HOWEVER this support is not free.
USB DisplayLink Network Adapter VID_17E9 PID_6006
USB-C USB3 Dock D6000
Supports up to three 4K displays or a single 5K display
Four USB 3.0 ports
One USB-C port
Kensington Lock Slot
Charges up to 65W laptop via USB-C
Dell Universal Dock - D6000 (with USB-C cable and USB-A adapter attached)
130W AC Adapter
* Third 4K display at 30 Hz
† Up to Dual 4K displays with USB 3