Highlighted
Not applicable

Powervault MD3600 failed HD

Jump to solution

We have a Powervault MD3600 with a failed HD in a 6 drive virtual disk.  I have replaced the failed drive but it is now listed as UNASSIGNED.  How do I assign it to an existing virtual disk?  I have another pending failure disk and I can find instructions for failing it but I am not able to locate any help for a drive that is already failed.  Normally in a RAID 5 I would expect a new drive to be added to the RAID group and automatically begin to rebuild but that hasn't happened.

Thanks -

0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Not applicable

Re: Powervault MD3600 failed HD

Jump to solution

Thank you. Problem resolved.

Mike

Mike Shisko

Director, Information Technology

Hitachi Consulting

Work: +1.214-665-6868

Mobile: +1.214-906-5809

View solution in original post

0 Kudos
Reply
3 Replies
Highlighted
3 Argentum

Re: Powervault MD3600 failed HD

Jump to solution

Hi mshisko,

This forum is for ViPR SRM, which is a monitoring platform, you should post this question on the Storage forum.

Regards,

Isaka

0 Kudos
Reply
Highlighted
3 Argentum

Re: Powervault MD3600 failed HD

Jump to solution

Hey mshisko

You could try posting your question to the following link:

http://en.community.dell.com/support-forums/storage/f/1216

Thanks

Tim

0 Kudos
Reply
Highlighted
Not applicable

Re: Powervault MD3600 failed HD

Jump to solution

Thank you. Problem resolved.

Mike

Mike Shisko

Director, Information Technology

Hitachi Consulting

Work: +1.214-665-6868

Mobile: +1.214-906-5809

View solution in original post

0 Kudos
Reply