Unsolved
This post is more than 5 years old
3 Posts
0
1121
Data is not collected when running emcgrab on esx server
Data is not collected when running emcgrab on esx server
the output of the file is:
GrabScript version: 1.3.1
Command line options:
Modules to be processed: Linux_4 esx_4 pp se clariion inq
Module Linux_4 started at : 10/05/11 - 08:00:48
Module Linux_4 not found. Skipping ...
Module esx_4 started at : 10/05/11 - 08:00:48
Module esx_4 not found. Skipping ...
Module pp started at : 10/05/11 - 08:00:48
Module pp not found. Skipping ...
Module se started at : 10/05/11 - 08:00:48
Module se not found. Skipping ...
Module clariion started at : 10/05/11 - 08:00:48
Module clariion not found. Skipping ...
Module inq started at : 10/05/11 - 08:00:48
Module inq not found. Skipping ...
Data Collection Started at : 10/05/11 - 08:00:48
Data Collection Finished at : 10/05/11 - 08:00:48
Please help!!
Booyah2
184 Posts
0
May 13th, 2011 12:00
Hello Pricci,
Are you running ESXi_4 server?
If so, this requires a specific grab utility.
you can download it from this FTP site:
This information is found in knowledge article emc243327
ftp://ftp.emc.com/pub/emcgrab/ESXi/
Also I found one other article emc211864
EMC Grab was touched by a Windows application such as winzip before transfer to ESX server.
Make sure the grab script is transferred to the server in binary mode.
Forum Reminder:
If you find any of the replies to your question as helpful, please be so kind as to mark replies as being "helpful" or "answered".
This helps us track our success with the Forum.
AlbertoLuna123
10 Posts
0
January 13th, 2014 10:00
I have the same problem, in the EMCGrab/Report in ESX/ESXi/Windows, aren´t information about HBA´s or Server's model...
I guess, is not a problem in procedure or in the version of the EMCGrab/Report, in another the EMC Grab or Report sends the correct information, but in others not.
I downloaded Sahara but analisys don't shows valuable information about some systems
do you know if this issue has a solution? or i have to get data manually?
thanks