This post is more than 5 years old
73 Posts
0
853
Flag Bit for FC-AL Mode connections
Anyone know which flag to set to allow loop mode on an FA port on the VMAX.
This post is more than 5 years old
73 Posts
0
853
Anyone know which flag to set to allow loop mode on an FA port on the VMAX.
Top
PedalHarder
465 Posts
0
November 5th, 2013 13:00
It's the Init_Point_to_Point Fibre flag. When set to Disabled, the port is set to arbitrated loop.
Steve0_2012
73 Posts
0
November 5th, 2013 14:00
Yes I just came across this flag earlier. So when the flag is left unticked is it disabled?
Thanks for feedback.
PedalHarder
465 Posts
1
November 5th, 2013 14:00
You can confirm the state via CLI with:
symcfg -sid xx -fa nn -p N list -v
Where xx is your serial number, nn is the FA number and N is the FA port number.