This post is more than 5 years old
220 Posts
0
7786
Serial Number for symmetrix
How to find the serial number,Array family and product name for symmetrix using Symcli. I am not able to find those using below command
Symcfg -sid list -v.
Any help , Much appreciated.
Symcfg -sid list -v.
Any help , Much appreciated.
dynamox
20.4K Posts
1
September 18th, 2007 10:00
The following is the output of symcfg list -v
Symmetrix ID: 000187431362 <<<< ------ this is your serial number
Product Model : 1000S-M2 <<<< --- array family is DMX and model DMX 1000
Microcode Version (Number) : 5670
(16260000)
Microcode Date : 01.26.2007
Microcode Patch Date : 01.26.2007
Microcode Patch Level : 99
Cache Size : 65536
(MB)
# of Available Cache Slots : 1653751
Max # of System Write Pending Slots : 1324292
Max # of DA Write Pending Slots : 662146
Max # of Device Write Pending Slots : 19012
Symmetrix Total Operating Time : 191 days,
01:29:49
Symmetrix Power ON Time : Wed Feb 07
12:29:52 2007
Symmetrix Last IPL Time (Cold) : Wed Feb 07
13:41:33 2007
Symmetrix Last Fast IPL Time (Hot) : Tue Jul 10
11:10:59 2007
Host DB Sync Time : Fri Aug 17
14:51:24 2007
Symmetrix CLI (SYMCLI) Version : V6.0.2.0
(Edit Level: 648)
Built with SYMAPI Version : V6.0.2.0
(Edit Level: 648)
SYMAPI Run Time Version : V6.0.2.0
(Edit Level: 648)
Number of Configured (Sym) Devices : 1169
Number of Visible (Host) Devices : 7
Number of Configured Actual Disks : 142
Number of Configured Hot Spares : 2
Number of Unconfigured Disks : 0
Maximum number of hypers per disk : 255
Number of Powerpath Devices : 0
Powerpath Run Time Version : N/A
SDDF Configuration State : Enabled
Configuration Change State : Enabled
WORM Configuration Level : N/A
WORM Characteristics : N/A
Symmetrix Configuration Checksum : 76A069
Switched RDF Configuration State : Disabled
Concurrent RDF Configuration State : Disabled
Dynamic RDF Configuration State : Disabled
Concurrent Dynamic RDF Configuration : Disabled
RDF Data Mobility Configuration State: Disabled
Access Control Configuration State : Disabled
Device Masking (VCM) Config State : Enabled
VCMdb Access Restricted State : Disabled
Multi LRU Device Assignment : BY_NUMBER
Disk Group Assignments : In Use
Parity Raid Configuration : RAID-S
(7+1)
Raid-5 Configuration : RAID-5
(7+1)
PAV Mode : NoPAV
PAV Alias Limit : 0
SRDF/A Maximum Host Throttle (Secs) : 0
SRDF/A Maximum Cache Usage (Percent) : 0
From the above output I can see the product model as
1000-M2. But i just want to know what is the serial
number of symmetrix and Array Family or Array Type.
Symmetrix ID is considered as serail number or last
four digits of ID considered as serail number.
Because Calriion has serial number any storage device
has unique serial number.
Please let me knowif you need any info
dynamox
20.4K Posts
0
September 13th, 2007 19:00
xe2sdc
2.8K Posts
0
September 14th, 2007 02:00
dynamox
20.4K Posts
0
September 14th, 2007 03:00
xe2sdc
2.8K Posts
0
September 14th, 2007 06:00
I've asked to put a GPS module inside every box so that the customer will be able to issue the brand new "symgps" command and have both a trusted time source and a correct localization of the box. With a simple perl script it will be possible to have a nice google-map with the image of the building where the storage is located...
The only drawback is that you need to leave at least an open window in the room so that the GPS module can receive signals from the satellites.
Unfortunatly I'm unable to obtain the level of the ground and combine with the GPS data to obtain the number of the floor where the box is located ... any suggestion ??
dynamox
20.4K Posts
0
September 14th, 2007 09:00
we need to contact our wonderful resources at NSA or FBI ..i am sure they already have the technology. EMC just needs to make another acquisition to make it happen. Maybe in code 73 ?
naren23-3_uew
220 Posts
0
September 14th, 2007 10:00
We have following property need to be populated from SymCLI.
1. Array Family
2. Array Type
3. Product name
If i do Symcfg list -sid 000187431362 -v
output:
=====
[Symmetrix ID: 000187431362
Time Zone : Eastern Daylight Time
Product Model : 1000S-M2
Symmetrix ID : 000187431362
Microcode Version (Number) : 5670 (16260000)
Microcode Date : 01.26.2007
Microcode Patch Date : 01.26.2007
Microcode Patch Level : 99]
In the above output i am getting Array model as 1000-M2. Can you please tell me what is the Array family and product name for the above symmetrix array.Or Array family and product name is same as Product Model property. Or Is there is any separate CLI for that. Please correct me if i am wrong.
dynamox
20.4K Posts
1
September 15th, 2007 05:00
So product name is Symmetrix
Families are:
» Symmetrix 3000
» Symmetrix 5000
» Symmetrix 8000
» Symmetrix DMX
Versions for each family:
» Symmetrix 3000
Symmetrix 4.0 (models : 3330, 3430, 3700, 3700-47 )
Symmetrix 4.8 (models: 3630, 3830, 3930 )
» Symmetrix 5000
Symmetrix 4.0 (models : 5330, 5430, 5700, 5700-47 )
Symmetrix 4.8 (models: 5630, 5830, 5930 )
» Symmetrix 8000
Symmetrix 5.0 (models : 8430, 8730-36 )
Symmetrix 5.5 (models: 8230, 8530, 8830 )
» Symmetrix DMX
DMX 1000 (models: 1000-m2, 1000-p2 )
DMX 2000 (models: 2000-m2, 2000-p2 )
DMX 3000
DMX 800
DMX-3 (models dmx3-950 ..and other )
DMX-4
naren23-3_uew
220 Posts
0
September 17th, 2007 12:00
How do we get Symmetrix family information from SymCLI?
Regards
Naren
plambeck
3 Posts
0
September 18th, 2007 00:00
symcfg list
no more it gives you all you need
Message was edited by:
plambeck
xe2sdc
2.8K Posts
0
September 18th, 2007 00:00
naren23-3_uew
220 Posts
0
September 18th, 2007 10:00
The following is the output of symcfg list -v
Symmetrix ID: 000187431362
Time Zone : Eastern Daylight Time
Product Model : 1000S-M2
Symmetrix ID : 000187431362
Microcode Version (Number) : 5670 (16260000)
Microcode Date : 01.26.2007
Microcode Patch Date : 01.26.2007
Microcode Patch Level : 99
Cache Size : 65536 (MB)
# of Available Cache Slots : 1653751
Max # of System Write Pending Slots : 1324292
Max # of DA Write Pending Slots : 662146
Max # of Device Write Pending Slots : 19012
Symmetrix Total Operating Time : 191 days, 01:29:49
Symmetrix Power ON Time : Wed Feb 07 12:29:52 2007
Symmetrix Last IPL Time (Cold) : Wed Feb 07 13:41:33 2007
Symmetrix Last Fast IPL Time (Hot) : Tue Jul 10 11:10:59 2007
Host DB Sync Time : Fri Aug 17 14:51:24 2007
Symmetrix CLI (SYMCLI) Version : V6.0.2.0 (Edit Level: 648)
Built with SYMAPI Version : V6.0.2.0 (Edit Level: 648)
SYMAPI Run Time Version : V6.0.2.0 (Edit Level: 648)
Number of Configured (Sym) Devices : 1169
Number of Visible (Host) Devices : 7
Number of Configured Actual Disks : 142
Number of Configured Hot Spares : 2
Number of Unconfigured Disks : 0
Maximum number of hypers per disk : 255
Number of Powerpath Devices : 0
Powerpath Run Time Version : N/A
SDDF Configuration State : Enabled
Configuration Change State : Enabled
WORM Configuration Level : N/A
WORM Characteristics : N/A
Symmetrix Configuration Checksum : 76A069
Switched RDF Configuration State : Disabled
Concurrent RDF Configuration State : Disabled
Dynamic RDF Configuration State : Disabled
Concurrent Dynamic RDF Configuration : Disabled
RDF Data Mobility Configuration State: Disabled
Access Control Configuration State : Disabled
Device Masking (VCM) Config State : Enabled
VCMdb Access Restricted State : Disabled
Multi LRU Device Assignment : BY_NUMBER
Disk Group Assignments : In Use
Parity Raid Configuration : RAID-S (7+1)
Raid-5 Configuration : RAID-5 (7+1)
PAV Mode : NoPAV
PAV Alias Limit : 0
SRDF/A Maximum Host Throttle (Secs) : 0
SRDF/A Maximum Cache Usage (Percent) : 0
From the above output I can see the product model as 1000-M2. But i just want to know what is the serial number of symmetrix and Array Family or Array Type.
Symmetrix ID is considered as serail number or last four digits of ID considered as serail number. Because Calriion has serial number any storage device has unique serial number.
Please let me knowif you need any info
naren23-3_uew
220 Posts
0
September 18th, 2007 11:00
Thanks for quick response. I got it. The symmetrix has only DMX array family.Please confirm.
Thanks
dynamox
20.4K Posts
0
September 18th, 2007 11:00
» Symmetrix 3000
» Symmetrix 5000
» Symmetrix 8000
» Symmetrix DMX
xe2sdc
2.8K Posts
0
September 19th, 2007 00:00
Look at the previous posts... There are different families and a lot of members for each family.