Unsolved
This post is more than 5 years old
102 Posts
0
778
Urgent SRDF question
Hi,
Currently i'm replicating some exchange devices from nj to ny through SRDF/A all the devices are in same device group.Now i have to stop replicating some of the devices and i need to breat the relation ship also.
Can anyone help me out how to do this.
Consistency is enabled..
One more question after breaking the relation ship how can remove them from the dg..
Thanks in advance
praveen56
102 Posts
0
January 5th, 2010 16:00
I followed this procedure..
1.Suspended the link
2.split
3.I tried to delete the pair for those two devices using
symrdf -f file deletepair -rdfg
i incleded those two devices in the file but when i ran this command device group has become invalid i dont why can any one explain this
Thanks
kensagle
59 Posts
1
January 6th, 2010 04:00
SRDF-A needs to keep all the devices in the same state in the same RDF group. You will need to change the sync mode then you can edit/remove devices and then set it back to SRDF-A.
Sagle
RobertDudley
448 Posts
1
January 6th, 2010 05:00
As Ken stated the entire group has to be either in SRDF-A or not so:
Drop it out of SRDF-A mode and into adaptive copy disk (what most do)
Stop the sync on the devices you want to remove
Delete the pairing and remove the devices from the device group
resume SRDF-A for the group and enable consistency
praveen56
102 Posts
0
January 6th, 2010 06:00