This post is more than 5 years old
25 Posts
0
731
looking for symcli syntax
what is symcli syntax to pull IOPs for a particular time and to determine which hosts is creating load (spikes). I see significant load increasing in perf manager and need to determin which host coming from--any ideas?
Quincy561
1.3K Posts
0
January 31st, 2012 07:00
You could just use symstat -i 60 -sid xxxx > file.txt
That shows the performance of every volume, so you could filter out the volumes for the specific host in question.
krsram
25 Posts
0
January 31st, 2012 07:00
it seems i can track back with PMA to check what host logged to which port with #symmask -sid xxx list logins still not clear how i determine which hosts for the load, possibly checking fabric/port saturation? or is there a symcli to assist with drill for load coming from
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
1
January 31st, 2012 07:00
symcli is real-time, if you have SPA or ECC Performance Analyzer you can pull up historical information.
krsram
25 Posts
0
January 31st, 2012 07:00
thanks Quincy56, so when i see the spike again i'll run this and check, thanks!!