Blackjack_43
2 Bronze

Re: App Server doesn't complete initialization

Yes, I am...

 

0 Kudos
rlebar
2 Bronze

Re: App Server doesn't complete initialization

The set path change in oware.cmd had no effect here.

So far I have tried to install on three different systems. The only one I got it to work on (no path changes) was a W2K SP2 system (Compaq DL360). I hooked up a crossover cable between its two NICs to *cough* network it.

I've tried on a Compaq DL380 running W2K SP3 with Terminal Services, What's Up Gold, and the Compaq Insight  Manger (and probably some other stuff) with no luck, including with the oware.cmd path change. It has several NICs in it but all are up.

I have also tried it on my IBM Thinkpad model A31 running W2K SP4. In theory it has one NIC, but I do have a docking station for it which internally might confuse things.

Note that the DL380 and my laptop both have Java installed. My laptop has its own installationog Cygwin as well (but it is not in the path, so...). And it has an Oracle install with its own Java in the PATH env variable.

We also have several security hotfixes (e.g. the msblaster related one). I'm wondering if there is a hotfix causing the problem?

The Dl360 is no longer at my disposal, but there is a SP2 DL380 that just became available that I can try and install on.

0 Kudos
rlebar
2 Bronze

Re: App Server doesn't complete initialization

The Dl360 is no longer at my disposal, but there is a SP2 DL380 that just became available that I can try and install on.

The installation worked on the Compaq DL380. W2K SP2 and no Java on the system. Two NICs. It does have Arcserv and some Tivoli related stuff running on it.

Here is a list of hotfixes it has:

Windows 2000 Hotfix - KB823182
Windows 2000 Hotfix - KB823980
Windows 2000 Hotfix - KB824141
Windows 2000 Hotfix - KB824146
Windows 2000 Hotfix - KB825119
Windows 2000 Hotfix - KB826232
Windows 2000 Hotfix - KB828035

The path change in oware.cmd was not applied.

So far I have only been able to get it to work on W2K SP2 systems.  Any ideas?

0 Kudos
rlebar
2 Bronze

Re: App Server doesn't complete initialization

The DL380 that it does not work on (even with the oware.cmd path change) is W2K SP3 with the following hotfixes (taken from the registry). It looks like it went from SP1 straight to SP3. The SP4 references are hotfixes that would be included as part of SP4, and similar for SP5. Just to be clear, the system has SP3.

SP-1
SP-1\Q816093
SP3
SP3\Q282522
SP4
SP4\Q322842
SP4\Q322913
SP4\q323172
SP4\Q323255
SP4\Q324096
SP4\Q324380
SP4\Q326830
SP4\Q326886
SP4\Q327269
SP4\Q327696
SP4\Q328310
SP4\Q328523
SP4\Q329115
SP4\Q329170
SP4\Q329553
SP4\Q329834
SP4\Q331953
SP4\Q810030
SP4\Q810649
SP4\Q810833
SP4\Q811630
SP4\Q814033
SP4\Q815021
SP5
SP5\KB823182
SP5\KB824141
SP5\KB825119
SP5\KB826232
SP5\KB828035

0 Kudos
wcsewell
2 Bronze

Re: App Server doesn't complete initialization

I am also having the same issues with appserver stuck in initializing mode.  After trying to change the blank password during the initial logon process, the system shows a "com.dorado.runtime.OWEventException" message.  It then prompts with "Invalid login" when I try the use the newly set password.

I am using Windows XP Professional/SP1 on a Compaq DL320, PIII 800Mhz, 512MB system with a 9Gig drive.  There are two built-in NIC ports.  The first port is enabled and the second is not.  This is a clean install and it is not part of a Windows domain.

I have reinstalled the product several times.  I performed the procedures for modifying the oware.cmd file found earlier in this thread without success.  Also, doing a netstat did not reveal any conflicts with using port 2606.

Hope you can help.

 

0 Kudos
cybx2003
2 Bronze

Re: App Server doesn't complete initialization

I am having the exact probelm, it stops at "stdout atjava.lang.Thread.run" as shown below.

(Nov 13, 2003 4:35:56 PM), stdout:  at org.jboss.Main$1.run(Main.java:381)
(Nov 13, 2003 4:35:56 PM), stdout:  at java.lang.Thread.run(Thread.java:484)
(Nov 13, 2003 4:35:56 PM), stdout:

I have tried uninstalling and reinstalling, I also tried on a different machine. I also tried the path fix to the .cmd file from an earlier article.

it looks as there are several issues listed here and luckly for the one team their issue was resolved. hopefully we can come up with a fix for this issue.

 

0 Kudos
Knight who says
2 Bronze

Re: App Server doesn't complete initialization

Hi there,

I have the same problem: APPServer keeps in initializing mode. Tried adjusting the .cmd-file: no result.

Last log-line is :

Dec 31, 2003 9:02:56 AM), stdout:  at org.jboss.mx.capability.ReflectedMBeanDispatcher.invoke(ReflectedMBeanDispatcher.java:284)
(Dec 31, 2003 9:02:56 AM), stdout:  at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:517)
(Dec 31, 2003 9:02:56 AM), stdout:  at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:324)
(Dec 31, 2003 9:02:56 AM), stdout:  at org.jboss.system.server.ServerImpl.start(ServerImpl.java:221)
(Dec 31, 2003 9:02:56 AM), stdout:  at org.jboss.Main.boot(Main.java:148)
(Dec 31, 2003 9:02:56 AM), stdout:  at org.jboss.Main$1.run(Main.java:381)
(Dec 31, 2003 9:02:56 AM), stdout:  at java.lang.Thread.run(Thread.java:484)
(Dec 31, 2003 9:02:56 AM), stdout:

When i try to start the manager-app, I can login, but when I change my password, I get another error message, like in one of the previous message.

App is installed on a PE2550, W2000 server SP4, 2 NIC's, 1 disabled/not connected.

I will try to put the NIC out in BIOS, en let you know my findings.

0 Kudos
Knight who says
2 Bronze

Re: App Server doesn't complete initialization

OK Guys :

I removed the OM-Network thing. Rebooted the server, turned 2nd NIC off in BIOS. Removed NIC from Windows. reboot. Reinstall OM-network thing.

Adjusted the cmd-file as suggested.

However: no result. APPServer still keeps initializing.

0 Kudos
jrobert55
2 Bronze

Re: App Server doesn't complete initialization

I'm having the same problem.
I had a sucessful installation on XP Pro, uninstalled and the problem started on re-install.
I see there hasn't been any activity on this thread for several weeks. Was there a solution ?

Thanks,
Jeff Roberts
0 Kudos
rlebar
2 Bronze

Re: App Server doesn't complete initialization

I think  everyone is waiting for the next release.
0 Kudos