Dell R720Dell R720 Power Utilization Monitoring thru SNMP

The OID 1.3.6.1.4.1.674.10892.5.4.600.60.1.20 is not correct.

I am refering the Dell Openmanage SNMP Reference Guide 7.4 but unable to pinpoint the correct OID.

All I need is the total power utilization graph for the server. Please advise.

I used a mib tool to look at all of the OIDs and there is not one for showing the
power utilization graph.

For those that came here looking for an answer, which I have not yet found via searching, here is what I found.

I was personally looking for a way to get the System Board Power consumption value that is visible in the iDRAC web UI.  

For me, the OID was found at IDRAC-MIB-SMIv2::amperageProbeType.1.3 (or 1.3.6.1.4.1.674.10892.5.4.600.30.1.6.1.3 )

The index for me was "3", but I would expect this to vary from system to system, most likely those with more or less than 2 power supplies.  In environments where this is not fixed, a better way is to get the entire amperageProbeTable and then parse it to get the value you need.

Indexes 1 and 2 for my system is the Power Supply amp usage (in 1/10ths of an amp).  Mine read 4 and 6, for a total of 1 amp, which matches the watts used reported in index 3, of 126.

I did not interpret the original question to mean pulling off historical data (graphing information).  Your network monitoring tool should handle this.