Unsolved
This post is more than 5 years old
7 Posts
0
5280
GX260 remote bios flash problem
Hello all,
using openmanage 6.5 to remote bios flash our various optiplexes. All flashing fine except for optiplex GX260s. Most of 260s were at A03. I can successfully flash to A06 but then cannot go higher. I can successfully write the header file and have done in both windows and DOS.
Openmanage is not finding the machines when I choose the A06 or higer bios to flash the 260s. I only get an accurate list when I select the A06. When the clients are successfully flashed with A06 I try to go to A08 or A09 and openmanage does not bring up a list of of 260s with A06.
any insight/help would be appreciated...
thank you
chris
using openmanage 6.5 to remote bios flash our various optiplexes. All flashing fine except for optiplex GX260s. Most of 260s were at A03. I can successfully flash to A06 but then cannot go higher. I can successfully write the header file and have done in both windows and DOS.
Openmanage is not finding the machines when I choose the A06 or higer bios to flash the 260s. I only get an accurate list when I select the A06. When the clients are successfully flashed with A06 I try to go to A08 or A09 and openmanage does not bring up a list of of 260s with A06.
any insight/help would be appreciated...
thank you
chris
retok
22 Posts
0
March 16th, 2005 08:00
thunk
7 Posts
0
March 16th, 2005 11:00
Yes Dell please advise. Lack of IT assistant by Dell is frustrating. I call server support they say is client issue call gold client support they dont even know what openmange or IT Assistant is...
chris