Unsolved
This post is more than 5 years old
4 Posts
0
18401
Hard Drive Failure in OpenMange Essentials
I recently installed openmanage essential.
1. Can I call dell support for configuring hard drive alerts in essentials
Thanks
Unsolved
This post is more than 5 years old
4 Posts
0
18401
I recently installed openmanage essential.
1. Can I call dell support for configuring hard drive alerts in essentials
Thanks
Top
DELL-Martijn G
291 Posts
0
October 28th, 2015 02:00
Hi,
It is not that difficult, if you want alert messages to indicate what the issue is you need to configure SNMP on the iDRAC's
In the iDRAC go the Alert page and enable alerts
Than on the SNMP Traps and Email and configure the IP address of the OME server (not the iDRAC of the OME server)
That being said, if you want this to be done by a Dell engineer, contact your Account Manager and he will be able to engage our Dell services to do a complete install and configuration of OME.
DELL-Martijn G
291 Posts
0
October 28th, 2015 06:00
Yes, that is possible.
Take a look at this whitepaper How to configure iDRAC7 Alerts Actions via OpenManage Essentials
That is from http://delltechcenter.com/ome
Do no use the script from the whitepaper but use this one instead. http://en.community.dell.com/techcenter/systems-management/f/4494/p/19657192/20836033#20836033
hojoah59
4 Posts
0
October 28th, 2015 06:00
I understand that I can do it from iDRAC. Problem is I have over 100 machines. I don't want to go into each server and set them individually. I am looking for a way to set hard drive failure alerts for all machines. I was hoping I could do it with OME or OMSA.
hojoah59
4 Posts
0
October 28th, 2015 11:00
Are there any step by step to send alerts from OME for Hard Drive Failures