Unsolved
This post is more than 5 years old
1 Message
0
739
M610 idrac offline
I have a M610 iDRAC that stopped responding and no longer displays its configured ip address from the CMC. Swapping the Management Riser Board and changing slots did not help. Interestingly, I can even update the Idrac firmware from the OS level. The CMC and idrac are the newest levels.
The following works: Power On/OFF from the CMC, Updating the Firmware from the OS, blade server is fully functional on the network.
The following does not work: KVM, IDRAC network interface , assign/read the IP from the CMC, update software or get software inventory
What's next?
idrac version 3.8
CMC version 5.12
Thanks
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
May 18th, 2016 07:00
Dionis2,
With the iDrac and CMC being up to date and at the most current revision, then I would start with trying to perform a RACADM RACRESET on the idrac, then I would do a CMC Failover, if there is a redundant CMC to failover to. Perform those steps and then let me know if the functionality returns.
Let me know if that helps.