Unsolved
This post is more than 5 years old
2 Posts
0
8123
OpenManage and perc6 config
I have an old server at a remote site running Windows 2003 64-bit. I had someone install an additional drive but it's not showing up in Windows. I'm assuming I need to run the perc6 configuration to add it as a new disk/array. There is currently no OpenManage or other Dell software installed
I don't really want to talk someone on site though using the Bios utility to configure the new disk. Is there a Windows based configuration utility I can download? I didn't see one so I tried to download Openmanage 2.0, got an error installing because of the old version of Windows, tried downloading 1.1 but the link was bad.
I initially need to configure the perc6, but I'd also like to run an update utility for drivers, bios, etc. I don't think this server has ever been updated.
What software is compatible that I can download?
a_pratap_singh
69 Posts
0
July 17th, 2014 03:00
Hi,
Thanks for your post.
Please find the below mentioned links to download Dell OpenManage Server Administrator and Server update utility for update and configure your system component on Windows Server 2003 x64 OS.
Dell OpenManage Server Administrator Download Link:
OMSA 6.5: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=G2WT6
OMSA 7.0: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=HPRYT
OMSA 7.1: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=30T1C
OMSA 7.2: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=PWX4G
Server Update Utility Download Link:
SUU 6.5.3: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=JH8XC
Thanks,
Amit