Hi,
I want to get the information about installed power supplies and their status from our servers via Redfish API. We have a mixture of R730xd, R740xd and M640 VRTX systems.
Using the URI https://<idrac ip>/redfish/v1/Chassis/System.Embedded.1/Power I can see both the installed power supplies and the redundancy status on 730 and 740 systems:
The VRTX systems however do not show and information and I was not able to find it anywhere else:Power information on VRTX
Firmware on the VRTX system is 5.00.00.00
Anybody has seen this as well and know a fix for it ?
Thanks
Thorsten
Solved! Go to Solution.
VRTX system have Power Supply on the chassis not on the blade server. As blade server does not have power supply iDRAC will not report it.
Thanks,
DELL-Shine K
#IWork4Dell
VRTX system have Power Supply on the chassis not on the blade server. As blade server does not have power supply iDRAC will not report it.
Thanks,
DELL-Shine K
#IWork4Dell
Thanks for your reply@DELL-Shine K
Is there a way to get the information on power supplies and disks on blade systems via RedFish as well ? I was not able to find anything coming from the system/blade. How would I access the blade chassis via RedFish ?
Thanks
Thorsten
Hello,
here some material about redfish that could be useful
Thanks
Marco