gmorris5
1 Copper

TPM Activation Using CCTK

I have tried several different ways to activate the TPM using CCTK.  I can turn on the TPM using CCTK but it will not activate.  I have tried with and without the password.  I have tried to turn it on, then reboot, then activate, and reboot again and still no luck.  I have cleared the TPM and reset the BIOS to default settings.  Has anybody had any luck automating this process?

0 Kudos
2 Replies

RE: TPM Activation Using CCTK

Hi HMorris,

The process of TPM activation can be automated using CCTK.

Please refer to the video for the right process, http://en.community.dell.com/techcenter/extras/m/white_papers/20209083.aspx

Please ensure TPM is in clear state, while doing the above process. If the TPM did not activate, please upgrade the BIOS and try.

You could check this white paper to find out how to automate the process http://en.community.dell.com/techcenter/extras/m/white_papers/20209083.aspx

Shrinidhi Katte

Software Dev. Senior Engineer

0 Kudos
gmorris5
1 Copper

RE: TPM Activation Using CCTK

I had already followed the instructions on the White Paper and it didn't work.  It didn't work using the video either.  It would tell me that I had to setup a password to activate to TPM but I had set a password and it still didn't work.  I updated the BIOS to the latest version and still no luck.  I am testing on a E6520.

0 Kudos