Unsolved
4 Posts
0
3224
WsMan/Powershell: ESXI Retrieve IDRAC Firmware version W/out using DRAC Interface
Is it possible to retrieve the iDRAC Firmware version using the CIM Powershell Commandlets without connecting to the DRAC?
I have been using the following resource for CIM Class Definitions:
At this point the only information I have found related to the iDRAC has been the BMC Version using the following URI:
http://schema.omc-project.org/wbem/wscim/1/cim-schema/OMC_MCFirmwareIdentity
DELL-Josh Cr
Moderator
Moderator
•
8.4K Posts
0
May 14th, 2018 14:00
Hi,
What model servers are you trying to get the info for? There are some things to check here https://www.dell.com/community/Systems-Management-General/Problem-with-WSMAN-for-iDRAC-6/td-p/4142515
tg79
4 Posts
0
May 15th, 2018 10:00
I am trying to access the information on a R630 Server. According to OMSA, iDRAC8 Version and LifeCycle Version are both at 2.10.10.10.
I will take a look at the link you provided.
Thanks for the help.
tg79
4 Posts
0
May 15th, 2018 15:00
I took a look at the link you provided and it does not appear to be applicable to my issue. The documentation seems to all relate to querying data from the iDRAC. In my case I am attempting to query data from the OpenManage agent that was installed on the ESXi host.
When querying the available profiles from the root/interop namespace, I get the following list:
I did find OMC_IPMIHostedIPProtocolEndpointAccessPoint which appears to give information related to the iDRAC IP. So I thought I might have been getting close, but as of this point I have been unable to determine where the firmware version might be located.
The iDRAC and LifeCycle Firmware version are both visible in the OMSA and OME Applications. My assumption being this data is actually being collected by the application using CIM/WSMan. Hopefully you can help me identify the CIM Class they are using to collect that data.