Highlighted
brimaster
Copper

Clearing Critical VRTX Chassis Alerts

When I sign into the VRTX CMC GUI for a particular system, there are two Critical Alerts on the Chassis Overview > Properties > Health page (which is the default homepage). The lights on the front of the physical chassis are also flashing red.

The critical alerts relate to the internal fans. Clicking the "chassis" link in the alerts takes me to the chassis section of the page, which shows a green check mark, and checking the fan information in the CMC GUI shows more green check marks.

Checking the hardware log shows a green check mark, and checking the Chassis log shows one alert: "The Chassis Log file was cleared."

How do I remove the critical alerts?

My CMC version is 2.0.4.

0 Kudos
10 Replies
Moderator
Moderator

RE: Clearing Critical VRTX Chassis Alerts

Hello

Many errors will persist throughout the system until the hardware log is cleared. The error status does not automatically clear for some events if the status returns to normal. It is set up this way to be sure you are aware of critical events that occurred on the system.

I would suggest saving the hardware log prior to clearing. It is useful to have have a history of logs when troubleshooting any future issues that may occur.

Thanks

Daniel Mysinger
Dell EMC, Enterprise Engineer

Get support on Twitter @DellCaresPRO

0 Kudos
brimaster
Copper

RE: Clearing Critical VRTX Chassis Alerts

Hi Daniel,


Even with the hardware log cleared, the alerts persist on the home page. I can't find a way to remove them. Do you have any suggestions?


Thanks

0 Kudos
Moderator
Moderator

RE: Clearing Critical VRTX Chassis Alerts

Hi Daniel,


Even with the hardware log cleared, the alerts persist on the home page. I can't find a way to remove them. Do you have any suggestions?


Thanks

What is the exact error?

Which logs did you clear. There are hardware logs on the modules and there are chassis logs as well.

Thanks

Daniel Mysinger
Dell EMC, Enterprise Engineer

Get support on Twitter @DellCaresPRO

0 Kudos
brimaster
Copper

RE: Clearing Critical VRTX Chassis Alerts

Here are some screenshots showing the errors that are displayed, the two logs that have been cleared, and the fan status.

This error message has persisted since before clearing the logs.

0 Kudos
clvlndpunk
Copper

RE: Clearing Critical VRTX Chassis Alerts

Was there any solution found to this?  i'm having the same issue and would like to clear that home screen.  I have also cleared both the hardware and chassis logs but the alerts are still showing on the main page

0 Kudos
lmdcmn
Copper

RE: Clearing Critical VRTX Chassis Alerts

Hi

Yes, I will like to know the same, both logs deleted, but still see "Foreign Configuration was detected on Physical Disk 0:0:22"

0 Kudos
Moderator
Moderator

RE: Clearing Critical VRTX Chassis Alerts

Hello

I will like to know the same, both logs deleted, but still see "Foreign Configuration was detected on Physical Disk 0:0:22"

Clearing the logs will stop the system from reporting issues that have already been resolved. If the issue continues to be reported then it is an active error. Active errors will not go away by clearing the logs. You should troubleshoot and resolve the issue. If the error persists after the issue is resolved then you may need to clear the logs to stop it from being reported.

Thanks

Daniel Mysinger
Dell EMC, Enterprise Engineer

Get support on Twitter @DellCaresPRO

0 Kudos
lmdcmn
Copper

RE: Clearing Critical VRTX Chassis Alerts

Hi

But the HD does not report any problems when checking that, but under chassis health is the alarm still listed. How to clear that?

/Carsten

0 Kudos
Moderator
Moderator

RE: Clearing Critical VRTX Chassis Alerts

But the HD does not report any problems when checking that, but under chassis health is the alarm still listed. How to clear that?

If you have cleared both logs then it is an active error. You need to resolve the issue to clear the error/warning. There are many possible reasons the drive will show a green check mark in the disk status but display a warning/error elsewhere.

One of the possible reasons would be that the drive is not certified. If you install a drive that is not certified it will show a green status on the physical disk, but warning lights will flash on the drive and warning messages may be in the logs to indicate a non-certified drive is in use. You should review the logs and information on the drive for any possible issues.

Thanks

Daniel Mysinger
Dell EMC, Enterprise Engineer

Get support on Twitter @DellCaresPRO

0 Kudos