Unsolved
This post is more than 5 years old
743 Posts
0
30634
How do update CPLD exactly???
Notes to update the latest Chassis firmware (3.2) suggest atht when doing this CPLD is also updated.
In the notes it says to do the following:
1. Place the files onto an DOS-compatible disk (e.g., floppy, USB key, etc.).
2. Run "M910-CPLD-A02.exe" from the command prompt.
But there are no instructions on how to do this.
Has someone got some detailed steps to follow for this?
Thx,
John Bradshaw
PS ITA 8.9 doesn't seem to know anything about CPLD updates which is a shame.
bradje1
743 Posts
0
March 31st, 2011 14:00
Bump....
xTrAsHeRx
10 Posts
0
November 8th, 2011 07:00
Hi,
Is it to install under Windows?
If so, I suggest to use the exe package and everything will update automatically.
But beware if it's a PowerEdge M610 running on a x64 OS, the only package available at the moment for this specific config seems to be only for x86.
Hope it helps
Md. Hamidul Haq
8 Posts
0
January 16th, 2014 21:00
Hi,
I am facing same problem on Dell Server R815, CPLD version mismatch. our OS is Windows 2008R2 Standard 64 bit. and my question is what is the command using for update CPLD?