Nagios Plugin: check_esxi_hardware and Dell PowerEdge R620: Riser Config Err 0

Hai....

IHAC that is running the "check_esxi_hardware" Nagios plugin/script against their ESXi 5.0 R620 servers (current OMSA 7 is installed).

The servers return the status documented in that post:

http://www.claudiokuenzler.com/blog/289/check_esxi_hardware.py-dell-poweredge-r620-riser-board-config-err-warning

Any idea when this obviously wrong system status will be corrected....?

Thanks & regards,

stephan.