1 Copper

Dell Venue 11 Pro 5130 Screen Issues

Recently I installed the touch panel firmware update (sharp/samsung) for my 5130 along with a BIOS, chipset, and Dell power settings updates. All updates went as expected except for the touch panel update. After installation, the screen started to flicker and the touch screen capabilities were inverted in the Y-direction (when I touch the top of the screen it registers on the bottom, and when I swipe up it registers as swiping downwards).

Is this a known problem or are there deeper issues?

Also, I have done some preliminary research and have come up with nothing that fixed the problem. A system restore also had no effect.

Thank you in advance.

0 Kudos
1 Reply
1 Nickel

RE: Dell Venue 11 Pro 5130 Screen Issues

the screen flicker issue after BIOS & Touch Panel Update can be 'fixed' by changing the monitor screen refresh rate from 60 Hertz to 48 Hertz, not an ideal solution but it does stop the flicker.