Unsolved
This post is more than 5 years old
2 Posts
0
210466
GPS sensor Broadcom GNSS Geolocation
Hi,
I have a problem with sensor GPS of Broadcom. My device is a Tablet Latitude 10 Dell
I use the software Sensor Diagnostic Tool that test operation of GPS, but i receive message The pipe is closed (exception HResult: 0x800700E8)
See the image. Someone Have this problem?
danng007
1 Message
0
August 24th, 2013 08:00
1)-Goto Device manager >view by connection > Enabled GPS driver
2)-If possible, use Notepad to create 2 registry files LogOn and NetworkloOn as below:
2-1) LogOn.reg
[HKEY_LOCAL_MACHINE\SOFTWARE\Broadcom\Location\HAL]
"LogEnabled"=dword:1
2-2) NetworkIoOn.reg
[HKEY_LOCAL_MACHINE\SOFTWARE\Broadcom\Location\HAL]
"NetworkIoEnableMask"=dword:FFFFFFFF
3)-Click to run the 2 registry above.
4)-Find a clear location > Reboot your laptop > Run software Sensor Diagnostic Tool .
5)-Don't worry about "The pipe is closed " > wait for 2-3 minutes > the yellow "Initializing" will turn green "Ready".
6)-You may repeat step (4) with or without reboot.
(*) Good luck!
.
andre.coelho
2 Posts
0
August 26th, 2013 14:00
This procedure worked with you?
These commands did not work, but thanks for helping.
espimones
18 Posts
0
September 23rd, 2015 17:00
Cohelo:
Sorry because revive this post from so long ago. But I wonder, if possible and you remember it, how has you solved the problem? I have exactly the same problem.
Thanks.