This post is more than 5 years old
9 Posts
0
9138
Dell EMC Unity 300 Ports
Hello!
What's the total quantity of 10gb/s BASE-T ports and their usability (Eg., network only, iSCSI only, or capable of any traffic type)?
I believe it's 4, but I've gotten conflicting feedback. Thanks for any help!
DELL_ChrisHolloway
125 Posts
1
June 20th, 2017 04:00
There's 2 10Gb base T ports per SP (so 4 per array). They can be used for NAS or iSCSI or both, but bear in mind you can't use LACP (which you may want for NAS) when using iSCSI.
Rainer_EMC
8.6K Posts
0
June 20th, 2017 04:00
for 10GbE copper - max 10 per SP - two builtin plus 2x4 on I/O modules
the additional 2x CNA ports can also do 10GbE but only optical or TwinAX
please see the introduction to the Unity platform white paper and the Unity spec sheet for details.
let me know where exactly there is a conflicting doc
AYehia.E
1 Message
0
June 22nd, 2017 01:00
The four Embedded 10GbaseT ports can be used for block or file Ethernet traffic.
kelleg
4.5K Posts
0
June 23rd, 2017 08:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen
jorgelina.castro
3 Posts
0
January 23rd, 2018 11:00
Could you tell me if this 2x10Gb base T ports per SP can auto- negociate with 1Gb Ethernet Switch?
Rainer_EMC
8.6K Posts
1
January 24th, 2018 03:00
the 10BbaseT copper ports - yes
optical - never
kelleg
4.5K Posts
1
January 24th, 2018 12:00
The two built-in RJ45 ports support 1Gb or 10Gb. Auto-negotiate is supported.
glen