Unsolved
This post is more than 5 years old
1 Message
0
1327
naviseccli and Unity VSA
Trying to connect via navisseccli to a UnityVSA and get this:
[root@localhost bin]# ./naviseccli -User xxxxx -Password xxxxxx! -Address xxx.xxx.xx.xxx -Scope 1
Error returned from the target: xxx.xxx.xx.xxx
CLI commands are not supported by the target storage system.
Is this unsupported, or can I enable CLI access?
Rainer_EMC
8.6K Posts
0
February 12th, 2018 00:00
Unity uses a new CLI called UEMCLI
which you can download from support.emc.com
Rainer_EMC
8.6K Posts
0
February 12th, 2018 03:00
Other option is to enable ssh diag login via Unisphere and then ssh into the system - there is also a uemcli installed on the SP