Highlighted
cadencep45
2 Iron

unity equivalent to nas_checkup ?

Jump to solution

Is there an equivalent commend to the VNX nas_checkup health check ? and if so, can it also be invoked from the REST API ( so a automated check can be created )

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator

Re: unity equivalent to nas_checkup ?

Jump to solution

Hi castleknock

You can use UEMCLI (or the RestAPI equivalent). Have a look at the "Unisphere Command Line Interface User Guide" for Unity. Page 43 (Perform a system health check).

For the RestAPI guides, try this:

https://<Unity mgmt IP>/apidocs/index.html

Thanks

Andre @ Dell EMC

If this answered your question, please remember to mark this thread as resolved/answered, so it can help other users.

Andre @ Dell EMC
*** If this answered your question, please remember to mark this thread as resolved/answered ***
0 Kudos
2 Replies
Moderator
Moderator

Re: unity equivalent to nas_checkup ?

Jump to solution

Hi castleknock

You can use UEMCLI (or the RestAPI equivalent). Have a look at the "Unisphere Command Line Interface User Guide" for Unity. Page 43 (Perform a system health check).

For the RestAPI guides, try this:

https://<Unity mgmt IP>/apidocs/index.html

Thanks

Andre @ Dell EMC

If this answered your question, please remember to mark this thread as resolved/answered, so it can help other users.

Andre @ Dell EMC
*** If this answered your question, please remember to mark this thread as resolved/answered ***
0 Kudos
Rainer_EMC
5 Rhenium

Re: unity equivalent to nas_checkup ?

Jump to solution

see healthcheck in the UEMCLI  command reference guide

should be available from REST as well

see REST API reference

either available from support site

or on every Unity system online at https://<MgmtIP>/apidocs/index.html

Its not directly the same as on VNX

the VNX nas_checkup is just for the NAS side - Unity has health states instead

the Unity healthcheck is about the complete system but usually used before an upgrade