I need to create a report showing GB allocated and used by storage group and by tier

I just did a blog entry on something similar... It lists every meta device in an array... finds it's storage group...then runs a symcfg to find the thin pool...  It doesn't deal with FAST because it's not enabled in my lab... but you could adapt it pretty easily for your needs...

You can find it right here: http://blog.virtualstoragezone.com/symmetrix-meta-lun-reporting-perl-script/

symfast -sid XXX list -tech ALL -demand -vp

That doesn't show storage groups..  You can do a symfast -sid xxxx list -demand -association

But that isnt really a report but can be parsed.. i'm working on a quick perl script to make a csv

Symmetrix Id    : xxxxxxxx

Policy Name       : FAST_DEV

Storage Group     : Test_SG

Priority          : 2

RDF Coordination  : Disabled

Tiers (3)

   {

   ------------------------------------------------------------------------

                                           Logical Capacities (GB)

                         Ty           Max ---------------------------------

                          p Target    SG     Max SG   FAST SG

   Name                   e Prot      ()    Demand     Usage       Growth

   --------------------- -- -------- ---- ---------- ---------- -----------

   Tier0_DEV             VP R5(3+1)   100       4564          0       +4564

   Tier1_DEV             VP R5(3+1)   100       4564       1268       +3296

   Tier2_DEV             VP R6(6+2)   100       4564       3296       +1268

       Total                              ---------- ----------

                                               13692       4564

   }

chakrinr wrote: symfast -sid XXX list -tech ALL -demand -vp

Ok, so I got motivated and wrote a perl script to do this..  It just parses my symfast command from above.. Check it out on my blog here http://bit.ly/158mTTu

Hi Patrick,

try this one also:

symfast -sid 1234 show -fp_name Tier1