Unsolved
This post is more than 5 years old
48 Posts
0
1689
SLO command showing demand
I have been running a report for our VMAX 40K arrays that shows me demand by tier per storage group using this command....
symfast -sid xxxx list -demand -association
Is there an equilivent comand for SLO that will show me per storage group, how much data is on each disk group?
KW160
121 Posts
0
October 20th, 2015 06:00
symcfg -sid xxxx list -tdev -gb -detail -sg YYYYYYYYY
vic_engle
48 Posts
0
October 20th, 2015 07:00
That tells me how much of the SG is allocated but not which disk groups or pools. With the vmax2 FAST_VP model, I could easily report how much storage was in each tier. With the new SRP model, I'm not finding a way to make SLO tell me where the extents are.
KW160
121 Posts
0
October 26th, 2015 09:00
The command above shows per TDEV which pool the extents are in. It doesn't however add it up for the whole SG.
S Y M M E T R I X T H I N D E V I C E S
--------------------------------------------------------------------------------------
Pool Pool Total Compressed
Bound Flags Total Subs Allocated Written Size/Ratio
Sym Pool Name ESPT GBs (%) GBs (%) GBs (%) GBs (%)
----- ------------ ----- ---------- ----- ---------- --- ---------- --- ---------- ---
000XX - FS.B 102.0 - 0 0 57.8 57 0.0 0
DG1_FBA10K -.-- - - 2 3 - - 2.8 0
DG2_FBA10K -.-- - - 37 37 - - 37.8 0
DG3_FBA_F -.-- - - 17 17 - - 17.2 0
....