Unsolved
This post is more than 5 years old
30 Posts
0
3723
VNX5100 system configuration optimization for VMware vSphere 4.1 infrastructure
- As per the information I have gathered from the VMware vSphere Client when verifying the multipathing policy VMware ESXi automatically pre-decided for our VNX5100 upon installation, the SATP Plugin that has been automatically pre-configured based on the array type is “VMW_SATP_CX” and the multipathing policy is “VMW_PSP_MRU”.
cgermain_05286b
7 Posts
0
August 6th, 2011 03:00
Hello,
I will be out of the office on vacation Monday August 8,2011 Through Friday August 12, 2011, Returning Monday August 15, 2011.
Should you need immediate assistance please contact the help desk at 1-877-362-4832
Thank You
Chris Germain
Delaware North Companies Inc.
Sr. Systems Engineer
Infrastructure Services
716-858-5391
cgermain@dncinc.com
>>> maxximus 08/06/11 06:33 >>>
maxximus created the discussion
"VNX5100 system configuration optimization for VMware vSphere 4.1 infrastructure"
To view the discussion, visit: https://community.emc.com/message/558931#558931