This post is more than 5 years old
37 Posts
0
1153
VSI Storage Viewer and Solution Enabler Support for DMX3
Two questions in one day!! Have been banging my head against a brick wall for a little while with this one
I am currently trying to find out what combination of installed software will work to deliver the VSI Storage Viewer functionality for a DMX 3 customer running enginuity 5773 (possibly some older enginuity code revisions to, i.e. 5771 and 5772)
So there are three stages in this process where I need to work out compatibility
EMC VSI --> Solution Enabler --> Enginuity Code
So the EMC VSI to Solution Enabler support is easy to find out, I've attached it in case anyone is interested.
What I am having real trouble finding on elab navigator or the 26,000 page EMC Support matrix PDF is whether a version of Solution Enabler that works with the VSI works with Enginuity 5773.
If anyone can point me in the right direction I would be most grateful.
codyhosterman
286 Posts
0
February 23rd, 2012 14:00
Check out the Simple Support Matrix. It lists the latest versions of SE (on the right) as supported with 5773. With very few exceptions (if any) if Enginuity is not EOL it will be supported with the latest GA version of SE.
Here is the DMX-3/4 ESSM
https://elabnavigator.emc.com/vault/pdf/EMC_DMX_ESSM.pdf
Craig_Stewart
37 Posts
0
February 24th, 2012 10:00
Thanks Cody, exactly what I was looking for.