Unsolved
This post is more than 5 years old
87 Posts
0
600
CNA adapter stats
Is there a way to look at some details adapter stats for the CNA within a VNX.
Nexus switch is showing pause frames coming from the CNA and we wan't to have a look at the stats of the CNA in the VNX.
Regards,
John
DaGrin
87 Posts
0
April 5th, 2012 06:00
Yes, the FCoE adapters in a block VNX.
Rainer_EMC
8.6K Posts
0
April 5th, 2012 06:00
Do you mean the FCoE adapter in a VNX block SP ?
Do you have a VNX block or Unified system ?
kelleg
4.5K Posts
0
April 9th, 2012 17:00
As far as I know there is no way to get the statistics off the FCoE adapters in the VNX. I've seen this issue before and it has to do with a setting on the Nexus. I would contact Cisco for more information. They should be able to capture the traffic going to the array.
Are you using the active TwinX cables on the array? Did you get these from EMC or Cisco. Sometimes there is a mismatch with the cable types. VNX FCoE requires active cables.
glen