Celerra is unable to see the SVL L180 drives on the Datadomain.
Dart : 188.8.131.52
Data Domain OS 184.108.40.206-203537
IS there any document that describes a step by step
configuration on the celerra end and the DD end.
In this case DD is able to celerra but celerra is not able to see the DD drives.
If any one had such experience please share the resolution.They want to decommision the CDL and replace with Datadomain
Issue is resolved.
The HBA aux0 and aux1 needed to be reset as the CDL and the DD share the same ports .
.server_config server_x -v "fcp portreset=2"