Unsolved
This post is more than 5 years old
19 Posts
0
2446
DART on VNX
When you set up NAS part of VNX do you still use the vault disks to install DART or do you create totally different RAIDs to install DART and NAS related volumes...
What is the size of volumes that are used by NAS.
What's the differences between DART and FLARE on VNX? do they store in the same location or different location?
Where exactly can I find out on which set of disks? and what space is it taking up?
Thanks
Rainer_EMC
8.6K Posts
0
June 24th, 2012 12:00
On the first four disks on separate protected LUNs
Are you a customer or partner?
vTao
19 Posts
0
June 24th, 2012 15:00
I am a partner. Do you know how much is that protected lun.
Is there any reference article discuss about this?
Rainer_EMC
8.6K Posts
0
June 24th, 2012 17:00
On VNX the space is always reserved and the OE already installed
Space used - just look at a live system or use one of the capacity calculators
Details should also be in the knowledgebase
rupal1
433 Posts
0
June 25th, 2012 02:00
The EMC VNX series provides enterprise capabilities for file and block (FC, iSCSI, CIFS, NFS, FCoE) functionality except VNX5100 which supports only block configuration . Both the VNX and VNXe provides a one management interface for managing both File and Block based solutions.The reason why we have two OS's is that it allows us to utilize purpose built components (HW and SW) to take advantage of the native functionality and to scale independently.
My understanding -
1. Block based solutions are handled by FLARE.
2. File based solutions are handbled by DART.
3. Datamover is a like a host. File systems are accessed via Data Movers
Thanks
Rupal Rajwar