EMC SANCopy/F from HP-XP2400 Storage Array to VNX5400 Unified

Good afternoon gents,

Today, I am having trouble with creating successful EMC SANCopy/F sessions from HP-XP24000 to VNX5400 Unified.

I am open to any suggestions.

I have....

• Zoned HP-XP24k initiators to VNX initiators
  • 4 zones
    • Brocade Fabric A
      • ppvnx01_spa_p1_xp24k__7b
      • ppvnx01_spb_p2_xp24k__7b
    • Brocade Fabric B
      • ppvnx01_spb_p1_xp24k__8b
      • ppvnx01_spa_p2_xp24k_8b
• Zoned VNX as a host to HP-XP24k
  • Added additional initiators to production MS Cluster arrays to HP-XP-24K FA groups (7B, 7A)
• Trespassed my LUNs to test to see if there is a connection
  • SanCopy/F sessions could not see either SPA or SPB paths
• Executed command: xpinfo on HP24K array
  • Output:

• Drive : \\.\PHYSICALDRIVE1Q:                     Model : XP12000

• Port : CL7B                                  Serial # : 00045516

• Host Target : 0                                     Code Rev : 5001

• Array LUN : 00                                   Subsystem : 0004

• CU:LDev : 00:ed                                 CT Group : ---

• Type : OPEN-V                               CA Volume : SMPL

• Size : 1019 MB                             BC0 (MU#0) : SMPL

• ALPA : da                                  BC1 (MU#1) : SMPL

• Loop Id : 07                                  BC2 (MU#2) : SMPL

• SCSI Id : ---                               

• RAID Level : RAID5                               RAID Type  : ---

• RAID Group : 1-1                                   ACP Pair : 1

• Disk Mechs : R0000   R0100   R0200   R0300  

• FC-LUN : 0000b1cc000000ed                      Port WWN : 50060e8005b1cc61