This post is more than 5 years old
10 Posts
0
1237
File system replication
I created a replication session for a VDM from source_VNX to destination_VNX.
While i was trying to create replication session for the file system, on the destination side, I placed it on the physical datamover instead of the vdm. To rectify this I see two option
Option 1 :- One is to delete the current session and create a new session and place the file system correct in the vdm ( Cleaner option)
Option 2 :- Remount the file system from physical data mover to the vdm. ( Will this work ? Is there anything else that needs to be done like to full sync after mounting file system ?
Rainer_EMC
8.6K Posts
1
January 7th, 2016 14:00
both should work
ramprasad_d
10 Posts
0
January 10th, 2016 15:00
I went through the second option. And you don't need to perform any full sync.
-Ram
Rainer_EMC
8.6K Posts
0
January 12th, 2016 09:00
Correct – as long as we can recognize checkpoints with a common base the VNX will automatically use them as a base and just do an incremental update.