Unsolved
This post is more than 5 years old
Moderator
•
6.4K Posts
0
1396
How to add another default gateway IP ( route ) on VNX Block ?
My customer wants to add ( set ) for another IP static route for VNX block system as there are several router.
Does anybody have done this ? Anyway ,, would this be possible ?
I have checked this may be done by networkadmin -route -gateway command ,,, but it gets error ...
Rainer_EMC
8.6K Posts
0
July 17th, 2015 01:00
I dont think we support more than on default gateway
ayas
Moderator
Moderator
•
6.4K Posts
0
July 17th, 2015 03:00
hi Rainer...
Thanks for the reply .... if default gateway only allow to have one , It may possible to use
-route option and use [-add -destination .... ? Do you think ?
# networkadmin cmd option ......
-set [-o]
[-sp a|b (default = connected SP)]
[-name ]
[-portid (default = 0) -vportid (default = 0)]
[-vlanid | -vlandisable]
[-ipv4 [-address
] [-subnetmask ] [-gateway ]]-route [-o]
[-sp a|b (default = connected SP)] [-portid (default = 0) -vportidvportid> (default = 0)]
[-add -destination [-subnetmask | -prefixlenth ]
[-metric ] [-persistent]]
[-delete -destination [-subnetmask | -prefixength ]
[-modify -destination [-subnetmask | -prefixength ] -metric
[-sp a|b (default = connected SP)] [-portid (default = all per sp)vportid (default = all per portid)] [-list]
thanks !
aya
kparrotte
40 Posts
0
July 17th, 2015 04:00
Hi.
While it might be theoretically possible to configure more than one default gateway, it is not quite so simple to accomplish. Imagine you are probably trying for redundancy?
Personally, I think the risks probably outweigh any benefit.
Best Wishes
dynamox
20.4K Posts
0
July 17th, 2015 04:00
one default gateway, you will need to use regular static routes.
ayas
Moderator
Moderator
•
6.4K Posts
0
July 17th, 2015 04:00
hi dynamox!
thanks ! can you tell me how to then ? using networkadmin cmd ?
thanks !
aya
dynamox
20.4K Posts
0
July 17th, 2015 05:00
using server_route command