I'm completely new to EMC and to the clariion CX600 Storage.
I received this storage system without any documentation, so it took me some time to get the cabling right.
The system now boots properly and i managed to login after a password restore.
What i would like to do, is change the whole LUN/Raid setup.
I know that the first 5 disks are used for the OS and flare (right?)
Can i delete all LUN's en RAID groups to start over again, without losing Navisphere(OS) or flare?
thanks in advance!
Here's the current disk (4 arrays) setup:
yes - as long as you don't touch the reserved areas on the first five disks
I would suggest to ask in the Clariion category of the EMC support network (Powerlink auth required)
I only got a Powerlink Lite View account.. i guess there's no support contract for this product anymore..
Setting up the storage system is a goal of my internship over here..
Got one more question...
Want to connect this CX-600 storage to some hosts running 2k8 R2.
Now i found the following site, which says i need flare code 26:
I'm running flare code 11. What to do?!
For information on whats supported with EMC products I would suggest to use the official EMC Support Matrix – either through ELab Navigator on Powerlink or through emc.com and not google
PLEASE use the EMC SUPPORT forums Clariion category https://community.emc.com/community/support/clariion?view=discussions&start=0