Unsolved
This post is more than 5 years old
174 Posts
0
1106
Two different IP Address on same NAS virtual interface
Hi There,
We have configured NFS shares and have created a virtual device "LACP0" and assigned the IP Address 172.20.100.5. The existing subnet for NFS is completely used now and our Network Team has released additional subnet for upcoming servers which is 172.20.101.0/24.Can we configure two different IP addresses on the same virtual device? Can 172.20.100.5 and 172.20.101.5 co-exist on same virtual device "LACP0"?
Storage Model: VNX5500 (Unified)
Regards,
Dhakshinamoorthy Balasubramanian
victory_is_mine
236 Posts
0
November 1st, 2015 16:00
Have a look at this, page 34 and 45, it looks like it is doable. Let us know if this helped.
https://support.emc.com/docu48504_Configuring-and-Managing-Networking-on-VNX-8.1.pdf?language=en_US
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
1
November 1st, 2015 18:00
you need to use VLAN tagging (configuration will need to be done on network switch and on VNX).
Rainer_EMC
8.6K Posts
0
November 2nd, 2015 06:00
yes a device can have many interfaces with different IP addresses.
you need to understand the network config in order to see if it requires VLAN config.
see the VNX manual mentioned for more info