Unsolved
This post is more than 5 years old
12 Posts
0
1185
VNX 5300 cant see my Windows Server 2012 in Inititators
Hi we have a VNX5300 SAN
I have zoned the Windows 2012 server to the san.
the server is using one Emulex LPE 12002E HBA
I have installed MPIO on the server and i've ENABLED support for ISCSI and SAS devices.
Rebooted the server and now when i bring up MPIO in control panel, i can see 2 new DEVICE HARDWARE ID's
so i am guessing that the zoning on the fiber switch was done correctly.
But when i go to Unisphere and go to hosts>initiators menu, i dont see the new initiators listed. I believe they should automatically pop in there as new initiators, but i dont see them.
I tried to refresh and no luck
please help I did the zoning my self on 2 MDS 9124 switches
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
1
April 19th, 2016 17:00
what ID did you see ?
netmgt
12 Posts
0
April 20th, 2016 08:00
i see this
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
1
April 20th, 2016 19:00
those are not IDs for EMC devices. Sounds like you need to go back and validate your zoning.
netmgt
12 Posts
0
April 29th, 2016 05:00
Your RIght!
I fixed the issue with our zoning. It was the activate zone command in Cisco IOS that i forgot to execute.
thanks