Unsolved
This post is more than 5 years old
5 Posts
1
706
VNX MirrorView/S FC-Ports?
I have 2 VNX 5300 with an optional 4 x 8Gb/FC-Card installed in each SP Slot 0. I installed the MirrorView Enabler on both VNX and zoned the SAN that the Pysical Port VNX-0-SPA-2 and VNX-1-SPA-2 are in a zone. I did the same for VNX-0-SPB-2 and VNX-1-SPB-2.
But I'm not see any connections in the Unisphere, "Manage Mirror Conenctions".
I don't know whats wrong. Maybe the MirrorView Ports? Which are the MirrorView Ports for the configuration with an optional 4 x 8Gb/FC-Card?
Thanks
Hans-Peter
Rainer_EMC
8.6K Posts
0
July 8th, 2011 10:00
The MirrorView ports should be denoted with a Symbol in the UniSphere hardware page
I assume you know that currently you need to use navicli to administer MirrorView since these systems aren’t in the same domain
See emc262013
Rainer
hpl1
5 Posts
0
July 11th, 2011 13:00
Thank's for your help.
I've already seen emc262013. But I didn't realisized the CLI commands are neccessary for MirrorView between two VNX boxes to.
With the CLI it works
Hans