Ed La
2 Iron

VNX5400 Dual-Control Station MAC Address

Jump to solution

I have a VNX5400 with Dual Control Station and I can ssh logon with nasadmin to get the Primary Control Station MAC Address.

Without fail-over to Secondary, how could I get the Secondary Control Station MAC Address?????

Labels (1)
Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Rainer_EMC
5 Rhenium

Re: VNX5400 Dual-Control Station MAC Address

Jump to solution

Just login to the secondary control station

Besides the alias that switches each CS has its own IP

See /etc/hosts

0 Kudos
2 Replies
Highlighted
maniemc
2 Iron

Re: VNX5400 Dual-Control Station MAC Address

Jump to solution

Secondary CS also will have its own management I and can be loged in with users like nasadmin or root (without any failovers). If you got "ssh" program (inbuilt on linux. windows also possible) and just need to find mac, you can do like "ssh <secondary cs ip> /sbin/ifconfig eth3 " which skips the bashrc scripts and just gets the mac address.

Rainer_EMC
5 Rhenium

Re: VNX5400 Dual-Control Station MAC Address

Jump to solution

Just login to the secondary control station

Besides the alias that switches each CS has its own IP

See /etc/hosts

0 Kudos